Factory Supply Tactical Binoculars Military Infrared Quad Goggles Fov 120 Degree Night Vision Goggles

Products

Factory Supply Tactical Binoculars Military Infrared Quad Goggles Fov 120 Degree Night Vision Goggles

Factory Supply Tactical Binoculars Military Infrared Quad Goggles Fov 120 Degree Night Vision Goggles

Description With the new technology, Detyl developed a new Ground Panoramic Night Vision Goggles which called DTG-18N, T

Send your inquiry

DESCRIPTION

Basic Info
Model NO. DTG-18
Magnification 1X
Fov 120+/-2
Weight 880g
Optical Aperture F1.18, 22.5mm
Operating Voltag 2.6-4.2V
Resolution 57-64
Diopter +/-3
Range of Focus >0.25m
Wavelength of Infrared 850nm
Specification 155*136*83
Trademark Detyl
Origin China
Production Capacity 100 Pieces/Month
Product Description

Description

With the new technology, Detyl developed a new Ground Panoramic Night Vision Goggles which called DTG-18N, The purpose of the DTG-18N is to provide the operator more information under goggles, allowing him to more quickly move through the OODA Loop (Observe, Orient, Decide, Act). The most striking feature of the DTG-18N is the presence of four separate image intensifier tubes with four separate objective lenses arrayed in a panoramic orientation. The center two lenses point forward like traditional dual-tube goggles, giving the operator more depth perception, while two more tubes point slightly outward from the center to increase peripheral view. The two tubes on the right and the two on the left are spliced at the eyepieces. The operator sees the two center tubes somewhat overlapping the two outer tubes to produce an unprecedented 120° FOV. This is an absolute game-changer for the SOF community. The two right and two left tubes are housed in merged assemblies and are hung from a bridge, giving operators interpupillary adjustment options. They can also be easily removed and operated as independent handheld viewers. The IPD of the two system can be adjusted on the helmet mount.

 

The DTG-18N is not only powered by a battery on the device, but also by a remote battery packs, tethered to the unit via a standard DC cable. It comes with a pack that accepts four 3-Volt CR123A batteries that tend to power the unit for 50-80 hours (IR off). The remote battery pack provides a secondary function as a counterweight, which is needed considering the goggle weighs about 880g..

ModelDTG-18N
Structural modehelmeted turnover four-eyed NVG
Battery typeLithium battery (cr123Ax1) / cr123Ax4 external battery pack
Power supply2.6-4.2V
InstallationHead mounted(standard American helmet interface)
Control modeON/IR/AUTO
Over power consumption<0.2W
Battery capacity800-3200maH
Battery life30-80H
Magnification1X
FOV(°)120x50 +/-2 °
Horizontal 120+/-2 °
Vertical 50 +/-2 °
Parallelism of optical axis<0.1°
IIT gen2+ / gen 3
GAInAuto
Lens systemF1.18 22.5mm
MTF120LP/mm
Optical distortion3% Max
Relative Illumination>75%
CoatingMultilayer broadband coating
Focus range250mm-∞
Focus mode Manual focus facility
eye relief30mm
Pupil diameter8mm
Visibility range-1(+0.5~-2.5)
IPD adjust typeArbitrary continuously adjustable
IPD adjust range50-85mm
IPD lock type Manual lock
IR850nm 20mW
Working temperature range-40--+55ºC
Humidity range5%-95%
WaterproofIP65/IP67
Dimensions155x136x83mm
Weight880G(without battery)

Factory Supply Tactical Binoculars Military Infrared Quad Goggles Fov 120 Degree Night Vision Goggles

Factory Supply Tactical Binoculars Military Infrared Quad Goggles Fov 120 Degree Night Vision Goggles

Factory Supply Tactical Binoculars Military Infrared Quad Goggles Fov 120 Degree Night Vision Goggles

Factory Supply Tactical Binoculars Military Infrared Quad Goggles Fov 120 Degree Night Vision Goggles

Factory Supply Tactical Binoculars Military Infrared Quad Goggles Fov 120 Degree Night Vision Goggles

 


FAQ

Q: Are you the factory to provide OEM products?
A: Yes, we are factory focused on night vision for more than 21 years in China,
OEM/ODM service is available

Q: How about your product quality?
A: All items are provided with CE /FCC /RoHS certificates and our factory passed ISO 9000
To make sure the quality,all products will be 100% checked on production line,and we also

will randomly check base on AQL before shipping.

Q: Can I take a sample to test before I place formal orders?
A: Yes, you can take a samples at first . If there is a problem, our engineers are always here to help you.

Q: How long is your warranty?
A: All night vision have 12 months warranty. During this period, customers can replace or repair cameras for free.

Q: Can I have a refund for the defective night vision?
A: Yes, if the problem can not be solved , you could send the night vision back, and we will refund the money to you after we receive the night vision.